| 引用本文: |
李成舰’.夏新华2*.降糖灵颗粒成型工艺的研究[J].湖南中医药大学学报,2011,31(1):46-48[点击复制] |
|
| |
|
|
| 本文已被：浏览 2261次 下载 22次 |
| 降糖灵颗粒成型工艺的研究 |
| 李成舰’.夏新华2* |
| (1.湖南环境生物职业技术学院医药系) |
| 摘要: |
| 〔摘要〕目的筛选出最佳的降糖灵颗粒剂成型工艺条件〔方法采用单因素考察方法，以其成型性、溶化性、吸
湿性等为评价指标，筛选出其处方中加入辅料的种类、配比及最佳的成型工艺条件、结果确定最佳成型工艺条件
为干浸膏粉与辅料的比例为2:3，用50Ic PVPk 加入90%乙醇溶液制颗粒，其用量为320Ic-360Ic〔结论降糖灵颗粒
的优化成型工艺合理、可行、 |
| 关键词: 降糖灵颗粒 成型工艺 吸湿性 溶化性 |
| DOI： |
| |
| 基金项目: |
|
| Studyonmoulding process of Jiangtangling granules |
| LI Cheng一ian, XIA Xin-hua |
| (Hunan Environment Biological Vocational Technical College) |
| Abstract: |
| (Abstract〕 Objective To study a moulding process of Jiangtangling granules. Methods The
single factor
scopmty
optrmum
[()
method
sift the
was used with the indexes of moulding ability, solubility
accessories, matching and the best processing conditions.
and anti -hygro-
Result The best
process
conditions
5% PVPk
、、ere
that the ratio of dry
extract
powder and
accessones
was 2:3,
90% ethanol with
sz prepared the granules and the amount was 32%[()36%. Conclu-
lion The optimum moulding process is reasonable and feasible. |
| Key words: Jiangtangling granules moulding process anti-hygroscopicity dissolution |
|
二维码（扫一下试试看！） |
|
